Thank you for visiting our store. We would like very much to be your connector provider.
Because the weakest link in any antenna system is at the connections; it’s prudent to select quality connectors for all connection points. Quality usually costs more because higher quality materials are used as well as quality design, but quality doesn’t need to be overly priced.
Your high quality radio deserves the best antenna connectors, and we have the best for you at a great price.
This purchase is for one (1)
RFC Model 62-9940(S)
individually packaged, all Silver, Type N Male Crimp connectors for Belden 9913, RFC-400, LMR-400
coax cable and other same series cables. This connector accommodates the larger center conductors with .108 inches in diameter or # 11 AWG. We have this same style available for regular RG-8, RG-213, etc. in another auction. That center pin is for cables with .089 inches in diameter or #13 AWG.
Fitment of the coax outer braid/shield is accomplished by crimping. Center pin fitment may be either crimped or soldered.
We have the recommended Crimp Tool,
RFC Model 63-801K,
or only the crimp die set that fits many other brand crimp tool frames.
Recommended die cavities for this connector are
.128-inch
for the center pin and
.429-inch
for the outer braid.
We also have this connector with a Nickel Plated Brass Body, Gold Pin and
DuPont™
Teflon
®
in another listing with the same specifications; but at a slightly less cost. Both are popular.
Also included with each connector is an ~1-inch long, 2:1 ratio, heat shrink tubing to apply after fitment which makes for a professional looking installation.
Personal, friendly and fast shipping service is also included.
Look closely at the fit & finish of this connector. We’ve provided a photograph of the
actual connector
; not a stock, representative or generic photo or drawing.
Mechanical:
Superior quality construction consisting of an 40-micron premium Silver plated brass body and crimp ferrule, and an 8-micron Gold plated phosphor bronze center pin.
DuPont™
Teflon
®
is the dielectric known for its inert properties, permittivity, strength, and higher withstanding voltages over a wide range of high frequencies and temperatures.
Crimp it and forget it!
(See our auctions for the
low cost professional
c
rimp tool
for this and other connectors)
Electrical:
Impedance: True Constant 50-Ohm
Frequency Range: DC to 11-Ghz
Voltage Rating: 1500Volts Peak
VSWR: 1.3 max, 0-11 Ghz
Dielectric withstanding voltage: 2500 volts
Insulation resistance: 5,000 Meg ohms
Operating temperature range:
-65C to 165C (-85F to 329F)
.
RoHS Compliant
by Directive 2002/95/EC.
We gladly combine shipping with our other items.
SHIPPING INFORMATION:
$3.87 for the first and $0.30 for each additional.
No international shipping.