Thank you for visiting our store. We would like very much to be your connector source.
Your purchase will consist of Ten (10)
RFC 63-1SP-8400
Silver PL-259 type UHF straight Crimp/solder connectors in factory packages.
These connectors may be used with RG8, RG-213, Belden 8214, Belden 9913, LMR-400 and other coax cables of the RG8 type with ~ .405-in. OD Jacket. Personal, friendly and fast shipping service is also included.
These are our most popular crimp type connectors for use with the RG-8m 213, 9913, LMR-400 and other 400 series coax.
Additionally, with your purchase we include the factory data sheet with connector drawing, recommended coax cable striping dimensions, recommended crimp tool die cavity sizes and a sufficient length of polyolefin 2:1 ratio heat shrink tubing to add ~ 1-inch length to each connector. All this will aid you in making precise, professional looking fitments, resulting in many years of reliable service.
Look closely at the fit & finish of this connector. We’ve provided a photograph of the
actual connector
; not a stock, representative or generic photo or drawing.
Generic, stock or representative photos, copied from manufacturer’s websites, are often used when selling inferior items. Why would a seller not photograph the actual product he wants to sell?
Mechanical:
Superior quality construction consisting of a 30-micron premium silver plated body, center pin and crimp ferrule. Silver
offers the
lowest contact resistance
and makes the center contact tip a breeze to solder.
DuPont™
Teflon
®
is the dielectric known for its inert properties, permittivity, strength, and higher withstanding voltages over a wide range of frequencies and temperatures.
The premium silver plating assures a quick and positive soldering experience for the center pin.
Crimping the coax braid to the connector body eliminates the chance of damaging the coa
x with heat; e
specially if using LMR-400 or other 400 series low loss cables. The new low loss coax cables use
a gas injected polyethylene dielectric which
is very sensitive to heat. Over heat it while soldering the braid to the connector body on a
non crimp type connector
and
the foam insulator can easily distort and melt damaging the cable by altering the chara
c
teristic
impedance of the coax.
Crimp it and forget damage caused by
heat.
(See our auctions for the low cost professional, ratcheting
c
rimp tool for this and other connectors)
Electrical:
50-Ohm impedance, variable, DC to 300-Mhz (Commonly used in 450-512 Mhz range), Voltage Rating of 500V Peak. Operating temperature range is from
-65C to 165C (-85F to 329F)
.
RoHS Compliant
by Directive 2002/95/EC.
We gladly combine shipping with our other items. If buying other items in addition to these, you must use the shopping cart method to take advantage of combined shipping
USA SHIPPING INFORMATION:
FREE
via
USPS First Class Mail
with 2-5 day delivery anywhere within the U.S. including Alaska & Hawaii.
No International Shipping.